controllo automatico dell'illuminazione stradale tramite sensore di rilevamento dell'intensità della luce diurna

il sensore di movimento mira all'utilizzo dell'ambiente di illuminazione stradale, gallerie e fabbriche ecc., attraverso il rilevamento in movimento di veicoli, persone o oggetti, gli apparecchi di illuminazione sono controllati automaticamente in base alla programmazione per realizzare controllo intelligente dell'illuminazione. illuminazione stradale tradizionale, tunnel, gli impianti di illuminazione delle fabbriche sono per lo più controllati dall'ispezione del personale o da controlli regolari, che inizialmente soddisfano le esigenze della scena, ma non riescono ancora a ottenere l'effetto di un controllo intelligente., ad esempio : si accende o si attenua per aumentare la luminosità quando le persone stanno arrivando, e spegnere le luci quando le persone si allontanano; indipendentemente dalla direzione da cui entra la persona,, le lampade nell'area si accenderanno o aumenteranno automaticamente a seconda dell'impostazione; questa apparecchiatura collabora con le lampade intelligenti per risolvere perfettamente questi problemi. adotta la più avanzata e popolare tecnologia di comunicazione wireless lora, la distanza di comunicazione può raggiungere 3 chilometri senza ripetitore, e la misurazione effettiva raggiunge 1 chilometri, e la distanza di comunicazione è regolabile.

According to the real time traffic flow rate conditions, it cooperates with the intelligent lighting centralized controller to automatically control the illuminance of the roadway lights according to the changing of city roads brightness, to achieve the purpose of intelligent public lighting management.

Key Features n Applicable to signal control systems, traffic information service systems, road traffic monitoring and other application scenarios. n High precision millimeter wave radar with 4 million low illumination camera. n Max. 8 lanes of multi-target motor vehicles detection, longitudinal distance of 100m. n High spatial resolution and strong penetration ability, support working in all-weather environment, not affected by rain, fog, strong wind, dust, light, etc. n Built-in deep learning algorithm, support intelligent recognition function, support license plate recognition and target fully structured. n Supports detection of multiple targets’ position, lane, speed, direction and other info. n It supports lane statistics, traffic flow, speed, status, queue, time distance, spacing, Qty.of parking areas, avg.delay, space occupancy and time occupancy data, and supports statistical upload from 1 to 3600 seconds. n Supports traffic evaluation data output, including congestion, queue length, etc. n Each lane supports 2 virtual coils to output vehicle entry and exit signals, the virtual coil positions are configurable. n Fog penetration, strong light suppression, wide dynamic range, and has multiple white balance modes to suit various scene requirements. n Support Network & RS-485 data upload. Parameters Millimeter Wave Radar Target Type People / Motor Vehicles / Non-Motor Vehicles Max. Qty. of Detection 128 Working Frequency 80 ~ 81GHz Transmit power 12dBm(RFout)+18dB(ANTgain) Speed Detect Range -250 km/h ~ 250 km/h Detection Mode Doppler moving target detection, slow moving target detection, fast moving target detection Sweep bandwidth 136.5 MHz Modulation Waveform FMCW Max. Detection Distance 150m@0° ;    50m@士45° Horizontal angle measurement range 士45° Horizontal lobe 90° for MRR, 22° for  LRR Vertical Lobe 13°(-6dB) Refresh rate 12.5Hz Install Height 1~ 6m   Interface Serial Port 1 of RS-485 Port Snapshot Function Image Format JPEG Image resolution 2688 × 1520 Smart Functions Intelligent recognition Bayonet capture, license plate recognition, vehicle model recognition, vehicle body color recognition, brand, sub-brand. Exterior Interface Ethernet 2pcs RJ45 100 M / 1000 M Adaptive Ethernet port  Warning 1 Relay switch Function Features Min.illumination Colorful: 0.01 Lux @ (F1.2，AGC ON) Black & White: 0.001 Lux @ (F1.2，AGC ON) shutter 1/25s ~ 1/100,000s Video compression standards H.264, H.265, MJPEG Compression output bit rate 32 Kbps ~ 16 Mbps Video resolution 2688 × 1520 Frame rate 25 fps (2688 × 1520) Image Settings Saturation, brightness, contrast, white balance, gain adjustable through software Storage function TF General functions Heartbeat, password protection, NTP time synchronization Video format PAL General Specifications Dimmensions 226 mm (W) x 375.3 mm (H) x 206.4 mm (D) Working Temperature -30 °C ~ +70 °C Working Humidity 5% ~ 95% @ 40 °C，No condensation Working Voltage DC 24 V ± 10% Power Consumption 25 W Max. N.W. 3 kg ICR Type Infrared IP Rating IP67 Focal Length 12 mm Resolution 2688 × 1520 White Balance Automatic white balance Wide dynamic range Support Max. Energy Optimization achieving by the Smart Traffic Radar  and Video all-in-one Detecting Machine 

SOWIN Xenon Flash Tube for Professional Photography is built for studio strobes, high-speed imaging, and precision optical systems that demand ultra-high peak brightness, microsecond-class discharge, stable spectrum, and predictable long-run performance. This is not “just a lamp”—it is a controlled pulsed light source designed to keep output repeatable over time, especially under demanding flash frequencies and continuous production workflows. We manufacture multiple xenon lamp geometries—including linear, U-shaped, spiral, and ring designs—to match different reflector cavities, optical paths, and triggering structures. For integration stability, we also support a matched component ecosystem (trigger coils, transformers, capacitors, and electrical interfaces), reducing misfire risk and preventing “works today, fails later” replacement problems. For OEM replacement and program risk control, we recommend verification by geometry, trigger coupling, and duty window (flash energy + repetition). Send tube photos and trigger/wiring photos with your typical operating conditions to receive a verified matching recommendation and a procurement-friendly parameter summary.

Key Features: To prevent theft and vandalism, GPS positioning allows for real-time tracking of stolen street light. Hybrid AC & Solar Power or Pure Solar Power 4G Sim Card CAT 1 Communication Technology (Hybrid PLC / LoRa  /LoRaMesh) Auto-change Solar to AC by Smart Detect Sensor within 3 seconds Cloud based IoT Lighting Controlling & Monitoring Real Time Data: Watts / Voltage / Current / Power Factor can be Remote Reading Power Consumption / Faulty Reporting Using high efficiency 5050 leds,more than 200lm/w. Adopting high efficiency monocrystalline silicon solar panel, conversion rate is more than 21%. Grade A LiFePo4 battery,capacity is more than 80% after 2000 cycles. PWM and MPPT solar charger Horizontal or vertical pole installation,mounted angle is adjustable

ilCH-L 0101 loop controller è sviluppato in modo indipendente dalla nostra azienda. destinato all'illuminazione industriale di magazzini e stabilimenti, edifici,stazioni, e il sistema di controllo dell'illuminazione intelligente del tunnel, ecc., per controllare l'alimentazione degli apparecchi di illuminazione attraverso un'interfaccia uomo-macchina, per raccogliere dati e monitorare lo stato del circuito di alimentazione. il più vantaggioso per il sistema di dimming loop è di risparmiare molto sul controller della lampada individuale su ogni apparecchio di illuminazione, basta regolare tutte le lampade' la luminosità tramite la scatola di alimentazione di controllo centralizzata, l'armadio di distribuzione può anche collegarsi con il sensore di movimento o il sensore di illuminamento per garantire la più efficace gestione del risparmio energetico.

:root{ --ink:#0b1220; --muted:#48566b; --line:#d7e1ef; --bg:#eef2f7; --panel:#ffffff; --accent:#0b3b8a; --accentSoft:#e8f2ff; } .uos-wrap{margin:0; padding:14px; background:var(--bg); font-family:Arial,Helvetica,sans-serif; color:var(--ink); line-height:1.72} .uos-card{max-width:980px; margin:0 auto; background:var(--panel); border:1px solid var(--line); padding:14px; border-radius:0} .uos-title{margin:0 0 8px 0; font-size:16px; font-weight:900; letter-spacing:.2px} .uos-p{margin:0; font-size:14.2px} .uos-p + .uos-p{margin-top:10px} .uos-p strong{color:var(--accent); font-weight:900} .uos-badges{margin-top:10px; display:flex; flex-wrap:wrap; gap:8px} .uos-badge{border:1px solid var(--line); background:var(--accentSoft); padding:6px 10px; font-size:12px; border-radius:0} Urban-OS — Global IoT Lighting Center Grade Urban-OS is a municipal-grade lighting operating layer built on Cloud Server (or Sovereign On-Prem) + CH-800 gateway + SLC810/SLC910 lamp-level controllers. It delivers three governed outcomes: measurable energy savings, road & public safety, and value-added O&M ROI beyond electricity reduction. A Hybrid PLC + LoRa network keeps control stable across noisy feeders, transformers, and complex topology, while sensor networking enables demand-based dimming and precise fault localization. The dashboard provides map-based visibility, alarms, schedules, scenes, reports, and evidence-ready exports for committee review. Adaptive CCT 2700K↔6000K supports storm/fog/snow safety modes with traceable logs. With audit trails, role-based access, and OTA configuration, fleets stay consistent and defensible; when links degrade, cabinet intelligence enables offline autonomy until recovery. Open protocols & APIs prevent lock-in. Proven at scale, including 93 km corridor-grade deployments across highways and tunnels. Hybrid PLC + LoRa Lamp-Level Control 2700K↔6000K Evidence-Ready Offline Autonomy Open APIs

Why Choose an IoT-Enabled Hybrid Solar + Grid Street Lighting System? Modern cities are experiencing rapid expansion, rising energy demand, and an increasing need for reliable public infrastructure. Street lighting is one of the largest electricity consumers in any municipality, and traditional grid-powered lighting systems often struggle with high operating costs, unstable power supply, and limited management capability. At the same time, purely solar street lights face their own challenges, such as insufficient sunlight during rainy or cloudy seasons, battery degradation, and inconsistent performance in regions with harsh climates. These issues have created a strong global demand for a more resilient, intelligent, and cost-effective lighting solution—leading to the rise of IoT-enabled hybrid solar + grid street lighting systems. A hybrid street lighting system integrates three essential components: solar energy, the local electrical grid, and a high-cycle LiFePO4 battery backup. During sunny days, the solar panel provides power and charges the battery. At night or during cloudy periods, the system intelligently switches to battery or low-tariff grid electricity depending on availability. This dual-source architecture solves the “solar only” reliability problem while significantly reducing dependence on expensive peak-hour grid electricity. Cities benefit from lower electricity bills, improved lighting reliability, and reduced CO₂ emissions without compromising performance. The addition of IoT technology further transforms the system from a basic lighting device into a smart, data-driven infrastructure asset. With IoT lamp-level controllers, each street light can report real-time information such as voltage, current, temperature, battery state of charge, and power consumption. Faults—such as LED failure, low battery, or power loss—are automatically detected and sent to a centralized monitoring platform. This enables cities to replace traditional manual inspection with predictive maintenance, reducing manpower costs and minimizing downtime. IoT also enables precise lighting control. Municipalities can schedule automatic ON/OFF times, dim lights during low-traffic hours, or adjust brightness in response to weather, road conditions, or special events. When applied across thousands of street lights, these small adjustments can reduce energy consumption by 30% to 70%. Combined with hybrid power, cities can ensure that every roadway, rural village, industrial zone, or highway retains stable lighting even during extended rainy seasons, power outages, or natural disasters. For developing countries or regions with unstable grids, hybrid solar + grid IoT street lights offer an especially powerful advantage: continuous lighting security. Frequent blackouts are no longer a threat, and the system can maintain illumination for several nights using battery backup alone. This significantly improves road safety, reduces crime risk, and supports 24-hour economic ...